JENSEN-HEALEY SPECIFICATIONS AND ADJUSTMENTS
Before attempting to check or adjust wheel alignment, make sure tires are properly inflated. Refer to manufacturers specifications given in owners manual.
CASTER
If caster angle is not to specifications, adjust length of strut rods by loosening both (front and rear) lock nuts. Caster angle is decreased by shortening rods and increased by lengthening rods.
CAMBER
Camber angle is not adjustable. If not to specifications, check suspension for wear or damage and replace components as necessary
TOE-IN
Measure difference of distance between front of front tires and rear of front tires. If not to specifications, adjust by loosening outer sterring links and adjusting both equally to obtain specifications.
 |
| 1973 Wheel Alignment Specifications |
 |
| 1974 Wheel Alignment Specifications |
0 komentar:
Posting Komentar